Johns Manville Vapor Barrier Installation Nationwide

Johns Manville Vapor Barrier Installation: The Burbank Owner’s Guide

We install Johns Manville-compatible vapor barrier systems in Burbank homes for $1,800 to $3,400 depending on crawl space or attic square footage, and we stock the 6-mil and 10-mil polyethylene sheeting plus seam tape on every truck for same-day starts. Most Burbank homeowners discover the problem after a musty smell won’t clear, or their pest inspector flags torn polyethylene during a resale inspection - the barrier’s been breached for months by the time anyone looks.

Call (213) 816-1699

Which Johns Manville Models This Applies To

Johns Manville doesn’t sell a branded “vapor barrier installation kit” the way they sell batts or boards. What we’re matching is their specified polyethylene sheeting - typically 6-mil or 10-mil - used beneath their CI Max and Polyiso rigid foam installations where a ground cover or attic separation layer is required by code. Check your original JM paperwork for the phrase “Class I vapor retarder” or “ground-contact polyethylene.” The product code usually starts with a JM lot number, but the critical spec is the mil rating and whether your application needs permeability below 1.0 perm.

We carry both the JM-specified 10-mil virgin polyethylene and a quality aftermarket equivalent - the aftermarket passes the same ASTM E1745 Class A soil-gas resistance testing at roughly 15% lower material cost. For Burbank’s clay-heavy soil in the foothill zones near Verdugo Mountains, we typically recommend the 10-mil regardless of brand. The compatibility gotcha: JM’s CI Max calls for a 6-inch overlap minimum at seams, but some older Burbank tract homes from the 1970s have crawl spaces too low for proper overlap without trenching - we measure before we quote.

Topside Attic Insulation Burbank is an independent service provider with no affiliation to Johns Manville. We source JM-specified materials through regional distributors, same as any licensed contractor.

Signs Your Johns Manville Vapor Barrier Installation Is Failing

• Musty odors that persist after cleaning. The polyethylene has torn at a seam or penetration, letting soil moisture evaporate directly into the crawl space air. In Burbank’s late-summer monsoon pattern, relative humidity in an unsealed crawl can spike above 70% even when outdoor readings stay dry.
• Soft or cupping hardwood floors above the crawl space. Moisture vapor migrating upward through a compromised barrier raises the equilibrium moisture content of the subfloor. We’ve measured 16% MC on oak flooring in Magnolia Park ranches where the barrier had a 3-foot gash from a prior plumbing repair.
• White mineral deposits on the polyethylene surface. This is efflorescence from evaporating moisture carrying salts through the soil - it means vapor is moving, and the barrier isn’t stopping it. The plastic itself may look intact but has micro-perforations or inadequate lap sealing.
• Pest activity or rodent trails beneath the barrier. Burrowing disturbs the seal and creates new vapor pathways. In Burbank, roof rats from the hillside corridors exploit any ground-cover gap to nest; their tunnels function as moisture chimneys.
• Condensation on ductwork or insulation in summer. When the dew point of crawl space air exceeds the surface temperature of cold supply ducts, you get active dripping. A properly sealed 10-mil barrier with sealed seams keeps crawl space humidity low enough to prevent this.

Before

After

Replacement Cost & What’s Included

What drives the range: square footage, mil rating, whether we need to remove degraded existing material, and access - some Burbank crawl spaces off Glenoaks Boulevard have 14-inch clearances that slow every movement. Our price includes the polyethylene, seam tape, mechanical fastening at perimeter walls, and a written depth-and-coverage report with photos. Under Haven Standard Clause 1, you get the written price before anyone enters the crawl space. The 365-Day Done Right Promise covers installation defects; material warranty follows the manufacturer’s terms.

DIY or Call Us?

What you can safely check: look for tears, pooling water, or gaps at the perimeter walls. Use a moisture meter on the subfloor if you own one - readings above 14% suggest vapor migration.

Where DIY goes wrong: polyethylene in a crawl space is not a weekend tarp job. Seams must be overlapped 6 inches minimum and sealed with pressure-sensitive tape rated for damp substrates - duct tape fails in months. Perimeter termination requires mechanical fastening to foundation walls, often with a termination bar, or the barrier pulls free with seasonal soil movement. And in Burbank’s older homes, disturbed soil can release higher radon readings; a proper installation includes soil-gas venting considerations per LA County guidelines. We carry the right tape, the right fasteners, and we know where to look for the thermal bypasses that make the barrier perform or fail. Call (213) 816-1699 and we’ll read your crawl space with you.

FAQs