Icynene Attic Cleaning & Rodent Proofing Nationwide

Icynene Attic Cleaning & Rodent Proofing in Burbank: What to Know First

We provide independent Icynene attic cleaning and rodent proofing in Burbank, typically completing most jobs same-day or next-day depending on contamination severity. Most attic cleaning and rodent proofing jobs for Icynene-insulated homes in Burbank run between $1,800 and $4,200, with written pricing delivered before any work starts. This page is for Icynene owners in Burbank who have found rodent activity, soiled insulation, or compromised vapor barriers in their attic and need a technician who understands how open-cell and closed-cell foam systems differ from conventional insulation during cleanup and reinstallation. Call (213) 816-1699 for a free estimate with written scope.

Call (213) 816-1699

How Icynene Products Fail - and How We Fix Them

• Icynene Classic Max (open-cell) - moisture absorption and nesting substrate. Classic Max’s hygroscopic open-cell structure can wick urine and hold organic matter once rodents breach the thermal envelope. In Burbank’s dry climate, homeowners sometimes miss this until odor travels through ceiling penetrations. We remove the contaminated foam in controlled sections, HEPA-vacuum the substrate, and reinstall only after sealing all entry points with rodent-proof materials.
• Icynene ProSeal (closed-cell) - delamination from chewing and thermal bridging at gaps. ProSeal’s higher density resists compression but can separate from framing when rodents gnaw along edges, creating thermal bypasses - air paths that bypass the insulation entirely. We cut back damaged sections, assess the substrate for moisture damage, and reapply compatible closed-cell foam with proper adhesion testing.
• Icynene MD-R-200 (medium-density) - compromised air barrier at plumbing and electrical penetrations. This series is common in Burbank’s 2015-2020 builds where it was spec’d for its R-value per inch. Rodents exploit the gap between foam and penetrations that opened from thermal cycling. We remove around the penetration, install escutcheon plates or fire-rated sealant where code requires, then refoam with matching density.
• Icynene Classic Max with vapor-retarder paint - paint failure masking underlying contamination. Builders in Burbank sometimes specified vapor-retarder latex over Classic Max to meet code in roof assemblies. Rodent urine degrades this coating, and the white surface hides staining underneath. We strip to clean substrate, reassess whether a vapor retarder is still appropriate per current climate zone requirements, and reapply only what’s needed.
• All Icynene lines - odor retention in semi-rigid structure versus loose-fill alternatives. Unlike cellulose or fiberglass that can be fully removed and replaced, Icynene bonds to substrates. Partial removal risks leaving contaminated material. We use thermal imaging to map exactly where foam was penetrated, remove only those sections, and document with photos what stays and what goes so the homeowner has a record.

Our Icynene Attic Cleaning & Rodent Proofing Process

1. 1
   Inspection and thermal mapping. We photograph all Icynene surfaces, run a thermal camera to find thermal bypasses where rodents compromised the envelope, and identify entry points from roofline to foundation.
2. 2
   Written scope and price. Before any removal begins, you receive a written price, a line-item scope noting which Icynene series is present, and our 365-Day Done Right Promise - Haven Standard Clause 1, flat price, no surprises.
3. 3
   Controlled removal and HEPA containment. We section off the attic, run negative air if contamination is significant, and remove only compromised Icynene. Intact foam stays; we don’t sell removal you don’t need.
4. 4
   Substrate remediation and rodent exclusion. All entry points 1/4-inch or larger get steel mesh, copper wool, or concrete patch depending on location. We seal top plates, pipe chases, and eave returns - the thermal bypasses Wes Okafor mapped in Magnolia Park ranches back when they were still new construction.
5. 5
   Reinstallation with matched materials. We source replacement foam from Icynene’s distribution network or, where appropriate, compatible third-party closed-cell products. No proprietary lock-in - we also work with Reflectix and other systems when the assembly calls for it.
6. 6
   Documentation and closeout. You receive a Documented Photo Record of before, during, and after, plus a depth-and-coverage report for any new insulation. On jobs with significant air-sealing work, we provide blower-door numbers - the pressurization reading that shows, in one figure, how much conditioned air your home was losing before and after.

Before

After

What Icynene Attic Cleaning & Rodent Proofing Costs in Burbank

What moves the price: square footage of Icynene affected, whether the foam is open-cell (easier to remove) or closed-cell (denser, slower work), accessibility of the attic, and whether the original installation used vapor-retarder coatings that must be stripped. We also price in the exclusion work separately so you see exactly what keeps rodents out versus what cleans up the mess they’ve made. Call (213) 816-1699 for a free estimate - we’ll read any competing quote with you as part of our Free Second Opinion.

Why Burbank Homeowners Call Topside Attic Insulation Burbank for Icynene Work

The R-value is what the label says. The performance is what the blower-door test says. We care about the second number.

We’ve been working Burbank attics since before the 2015 energy code changes that drove Icynene’s popularity here. Wes Okafor and our crew know the difference between a 2018 ProSeal job that was sprayed too cold and one that was done right - and we know how to work with both without blaming the previous contractor. Our 365-Day Done Right Promise applies to every job, backed by a written warranty delivered before anyone lifts a tool. Calls are answered by a live person 24/7, and our technicians are background-checked, uniformed, and named in your appointment text. We also service Reflectix and other insulation systems, so if your attic assembly mixes materials, we don’t need to call in another trade.

FAQs