GreenFiber Home Energy Audit in Burbank: What to Know First
We provide independent GreenFiber home energy audit in Burbank, typically scheduled within 48 hours and completed in a single visit. Most audits run between $280 and $450 for a standard single-family home, with a written price delivered before we start any work. This page is for GreenFiber owners in Burbank who need to know whether their insulation is performing, where the air leaks are, and what the fix will actually cost. Call (213) 816-1699 to schedule or text us a photo of your attic access if you’re not sure what you’ve got up there.
How GreenFiber Products Fail - and How We Fix Them
- GreenFiber All Borate cellulose settling in Burbank’s dry heat. The material loses loft over 7-10 years in our climate, creating thermal bypasses along top plates and chimney chases. We measure the settled depth against the labeled R-value, then calculate the true performance gap. Our fix: remove or supplement with new blown-in to restore labeled depth, after air-sealing every penetration first.
- GreenFiber Sanctuary batt compression in 1960s Magnolia Park ranch attics. Original 2×4 or 2×6 rafter bays with minimal clearance compress standard batts below their rated thickness, dropping effective R-value by 30-40%. We find this with probe measurement and thermal imaging. Our fix: dense-pack cellulose or upgrade to high-R-per-inch material where space is constrained.
- GreenFiber Low Dust formulations that were over-moistened during install. Excess moisture from poor application technique triggers fungal growth in Burbank’s occasional humid winter weeks, especially near bathroom vents. We spot this with boroscope inspection and moisture meters. Our fix: remove compromised material, remediate, then reinstall to manufacturer spec with documented moisture readings.
- GreenFiber stabilized cellulose with failed adhesive in retrofit applications. The wet-spray binding agent breaks down when applied over hot, dusty sheathing in Burbank’s August attic temperatures, creating voids at eaves. We map these with blower-door-directed infrared. Our fix: strip and reapply, or switch to dry-blown with proper air sealing underneath.
- GreenFiber in contact with non-IC-rated can lights. This is an installation error, not a product defect, but we see it constantly in Burbank homes where previous contractors blew cellulose right over hot housings. It’s a fire code violation and an insurance problem. Our fix: install proper enclosures or replace with IC-rated LEDs, documented with photos for your records.
Our GreenFiber Home Energy Audit Process
- 1
Call and schedule. A live person answers 24/7. We ask square footage, year built, and any known issues. You get a 2-hour arrival window and a text when your tech is en route.
- 2
Visual and probe inspection. We identify your GreenFiber product line by color, density, and labeling remnants. We measure settled depth, check for compression, and photograph every condition we find.
- 3
Blower-door test. A pressurization reading that shows, in one number, how much air your building envelope is losing. We typically see 3,500-5,500 CFM50 in unsealed Burbank homes of this era.
- 4
Thermal imaging under pressure. With the house depressurized, we run an infrared camera to find the leaks the insulation isn’t stopping. Thermal bypasses at top plates, wire penetrations, and duct boots light up immediately.
- 5
Written scope and price. Before any work starts, you get a flat price, a written scope, and a written warranty. Haven Standard Clause 1: no exceptions. If you have another estimate, we’ll review it with you free.
- 6
Air seal first, then insulate. We seal every penetration with fire-rated foam and caulk, then add or replace GreenFiber or other material to match your performance target. Post-work blower-door test proves the result. Documented Photo Record delivered before we leave.
Before
AfterWhat GreenFiber Home Energy Audit Costs in Burbank
| Service | Typical Range |
|---|---|
| Basic home energy audit (blower door + thermal imaging + written report) | $280 - $350 |
| Audit with insulation inspection and depth mapping | $320 - $400 |
| Audit with duct leakage testing (Duct Blaster) | $380 - $450 |
| Air sealing only (after audit, typical 1,200-2,000 sq ft home) | $1,800 - $2,800 |
| Air sealing + GreenFiber supplement to restore labeled R-value | $2,800 - $4,200 |
What moves the price: attic accessibility (cathedral vs. scuttle), whether we need to move stored items, extent of existing material removal, and whether ductwork needs sealing. We also service Reflectix radiant barrier systems if your home has a hybrid install. Every estimate is free, written, and valid for 30 days. Call (213) 816-1699 for an exact quote.
Why Burbank Homeowners Call Topside Attic Insulation Burbank for GreenFiber Work
We’ve been working Burbank attics, including the older ranch-style homes in Magnolia Park, long enough to know exactly where the thermal bypasses hide in a 1960s rafter bay. Wes Okafor built this crew on sequencing the job correctly: air-sealing every penetration first, then blowing in the cellulose or batts, so the R-value on the invoice actually matches the performance the homeowner measures on their utility bill. The R-value is what the label says. The performance is what the blower-door test says. We care about the second number.
Our 365-Day Done Right Promise applies to all completed work. Background-checked, uniformed technicians. Calls answered by a live person, 24/7. Materials sourced from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber - no proprietary lock-in. As an independent GreenFiber service provider, we’re not affiliated with or authorized by the manufacturer, which means we recommend what actually fixes your home, not what moves a particular product line.
FAQs
No. GreenFiber’s limited warranty covers product defect, not installation or subsequent modification. Our audit is non-destructive and documents existing conditions without altering the install. If we do find a product issue, we flag it so you can pursue a claim directly with the manufacturer. Call (213) 816-1699 to schedule - estimates are free.
True GreenFiber All Borate has a gray-brown color and contains visible fiber clumps from recycled paper content; some competitors’ cellulose is dyed uniform green for marketing. We identify it by density, flame-spread rating test, and occasional remnant bag labels in the attic. If you’re unsure, text us a photo of your attic access and we’ll tell you before we arrive.
For most Burbank homes built 1950-1985, adding supplemental blown-in after proper air sealing costs 40-60% less than full spray foam conversion and achieves 80-90% of the performance gain. We only recommend foam when roofline conditioning is the specific goal or when rafter depth is too shallow for cellulose to reach target R-value. We’ll run both numbers in your written estimate.
Audit: same week, often next day. If we find issues and you approve the scope, air sealing and supplement work typically takes one full day for homes under 2,500 square feet. We don’t schedule work without a written price, and we don’t start work without your signature. Call (213) 816-1699 - a live person answers 24/7.
We carry GreenFiber All Borate and Low Dust formulations on our Burbank-area trucks, plus Owens Corning, Johns Manville, and Knauf alternatives if your job benefits from a different material. No special-order delays for standard residential quantities. If your home has Reflectix radiant barrier in addition to GreenFiber, we assess both systems during the same visit.
Written by Wes Okafor, Owner & Lead Insulation Technician, Topside Attic Insulation Burbank at Topside Attic Insulation Burbank, serving Burbank and nearby areas.