Demilec Blown-In Insulation Nationwide

Demilec Blown-In Insulation in Burbank: What to Know First

We provide independent Demilec blown-in insulation service in Burbank, typically completing attic jobs in one day with a written price delivered before any work starts. Most Demilec systems we encounter are legacy open-cell or closed-cell spray foam installations that need blown-in cellulose or fiberglass added as a top-up, or dense-pack wall cavities where the original Demilec application has settled or degraded. We do not work on speculation; you get a flat price and a written scope before the truck rolls.

Call (213) 816-1699

This page is for Burbank homeowners who see a Demilec label on their existing insulation and need to know whether it can be augmented, replaced, or worked around with blown-in material. Call (213) 816-1699 for a free estimate. Wes Okafor and our crew have been working Burbank attics long enough to know that a 1960s ranch in Magnolia Park with original Demilec open-cell and no air sealing is basically a slow cooker with a drywall lid every July.

How Demilec Products Fail - and How We Fix Them

• Demilec SEALECTION 500 open-cell spray foam shrinkage in wall cavities. This water-blown open-cell product was common in Burbank builds from 2008-2014 and can pull away from studs as it ages, creating a thermal bypass - a gap where conditioned air leaks past the insulation. We dense-pack the cavity with blown-in cellulose after sealing the gap with compatible adhesive; the cellulose fills the void and adds fire resistance the original foam lacked.
• Demilec Heatlok HFO High Yield closed-cell overspray in attics blocking soffit ventilation. HFO closed-cell is excellent at R-value per inch, but when previous installers sprayed over soffit baffles, the attic chokes. We remove the obstructed baffles, install proper venting, then blow in fiberglass to the correct depth without burying the air path. The R-value is what the label says. The performance is what the blower-door test says. We care about the second number.
• Demilec 500 wall foam settling below top plates in two-story Burbank homes. The top plate is the horizontal framing member where first-floor walls meet second-floor joists; it’s a notorious leak site when foam settles. We dense-pack the gap with blown-in cellulose through drilled access holes, then seal with acoustic caulk. This is standard practice on homes near the Verdugo Mountains where temperature swings accelerate settlement.
• Demilec open-cell moisture absorption in crawl spaces. SEALECTION 500 is vapor-permeable; in Burbank’s occasional heavy rain years, crawl space applications can wick moisture and lose R-value. We remove degraded sections, install a vapor barrier if absent, then blow in treated cellulose with borate pest resistance. The fix includes a documented photo record of moisture readings before and after.
• Demilec Heatlok XT retrofit compatibility with existing blown-in. When homeowners want to add blown-in fiberglass over existing Heatlok XT closed-cell, the rigid foam surface doesn’t hold new material well. We install a friction-fit fiberglass cap or netting system first, then blow to depth. Without this intermediate layer, the new insulation slides and creates uneven coverage - a common callback we avoid by sequencing correctly.

Our Demilec Blown-In Insulation Process

1. 1
   Call and scheduling. A live person answers 24/7. We book a site visit, send a text with the technician’s name and ETA under Haven Standard: Arrive on schedule.
2. 2
   Attic or wall inspection with documentation. We identify your Demilec product line, check for shrinkage, settlement, or moisture damage, and photograph everything. You keep these photos.
3. 3
   Blower-door test if applicable. We run a pressurization reading - a single number showing how much air your building envelope loses. This establishes baseline performance before any insulation touches the space.
4. 4
   Air sealing first, always. Top plates, can lights, plumbing penetrations, and electrical chases get sealed before blown-in material enters. We will never blow insulation over an unsealed attic floor.
5. 5
   Blown-in installation with depth verification. Cellulose or fiberglass is blown to the specified depth, measured with a ruled probe every 100 square feet. We note the coverage rate on your written scope.
6. 6
   Post-work testing and handoff. Where blower-door testing applies, we run the test again and publish both numbers. You receive the written scope, depth-and-coverage report, photo record, and 365-Day Done Right Promise documentation before we leave.

Before

After

What Demilec Blown-In Insulation Costs in Burbank

Most attic top-up jobs in a Burbank home of 1,200-1,800 square feet run between $1,800 and $3,400 when Demilec foam is already in place and we’re adding blown-in fiberglass or cellulose over sealed penetrations. Dense-pack wall work on a single story with Demilec settlement issues typically falls between $2,400 and $4,200, depending on cavity count and access difficulty.

What moves the price: whether we need to remove degraded Demilec first (add $800-$1,500), whether the attic needs new soffit baffles or venting (add $400-$900), and whether blower-door testing applies to your job scope. We do not estimate over the phone for Demilec work; the existing foam condition varies too much. Bring us a competing written estimate and we’ll read it with you - free second opinion, no obligation.

Call (213) 816-1699 for an exact quote. Estimates are free, and the price we write is the price you pay.

Why Burbank Homeowners Call Topside Attic Insulation Burbank for Demilec Work

We’re independently owned and operated under The Haven Standard since 2016 - not a franchise, not a lead-generation service. Our technicians are background-checked and uniformed; you get a named technician and a text when they’re on the way. We’ve handled Demilec, Reflectix, Owens Corning, Johns Manville, Knauf, and every other major insulation brand, so we’re not locked into a single product line that may not fit your situation.

Every job closes with a Documented Photo Record and, where applicable, before-and-after blower-door numbers. The 365-Day Done Right Promise means if it’s not done right, we make it right - backed by a written scope and written warranty delivered before anyone starts. In Burbank’s climate, with its 90-degree summer attic peaks and occasional winter dips into the 30s, that documentation matters more than a handshake.

FAQs