Icynene Home Energy Audit Nationwide

Icynene Home Energy Audit in Burbank: What to Know First

We provide independent Icynene home energy audit in Burbank, typically scheduling within 48 hours and completing most audits same-day. Most Icynene audits in this market run between $280 and $550, depending on whether you need a standalone blower-door test or the full envelope package with thermal imaging and duct leakage testing. We publish every blower-door number, before and after, so you see the actual performance change rather than a promise on a brochure.

Call (213) 816-1699

This page is for Icynene owners in Burbank whose homes aren’t holding temperature the way they once did, or who want baseline numbers before adding insulation. Call (213) 816-1699 to schedule. A live person answers, 24/7.

How Icynene Products Fail - and How We Fix Them

• Icynene Classic Max (open-cell) shrinkage at top plates. In Burbank’s dry Santa Ana cycles, Classic Max can pull back from framing edges 3-8% over five to seven years, creating thermal bypasses that blower-door tests catch at 2,800-4,500 CFM50. We map the gaps with thermal imaging, remove the compromised sections, and re-apply with proper humidity conditioning during install.
• Icynene MD-R-200 (medium-density) delamination from OSB roof sheathing. The MD-R-200’s higher rigidity doesn’t flex with seasonal expansion the way open-cell does; in Magnolia Park ranch homes with original 1960s roof decks, we’ve seen it separate at the foam-wood interface. Our fix is mechanical re-attachment of the substrate, then targeted foam replacement, not a full tear-out.
• Icynene LD-C-50 (low-density) moisture retention in crawl spaces. LD-C-50’s open-cell structure holds vapor when seasonal groundwater rises in Burbank’s clay-heavy soils, particularly near the Verdugo Mountains runoff zone. We pair removal with proper vapor barrier installation underneath, then specify closed-cell replacement if the location demands it.
• Icynene H2Foam Lite overspray into soffit vents. Well-meaning original installers sometimes filled soffit chases with H2Foam Lite, blocking intake ventilation and cooking attic air in July. We carve out the blockage, restore the vent channel, and document the corrected airflow pattern with smoke-pencil verification.
• Icynene ProSeal Eco (closed-cell) degraded surface from UV exposure. ProSeal Eco left exposed in unconditioned attic peaks, even briefly, chalks and loses its skin. We assess how deep the UV damage runs, trim to sound foam, and protect the repair with an ignition barrier coating that meets California Title 24.

Our Icynene Home Energy Audit Process

1. 1
   Schedule and scope. Call (213) 816-1699. We ask which Icynene product you have, the install year, and what symptom you’re seeing. You get a written price range before we dispatch.
2. 2
   On-site blower-door test. We depressurize the house to 50 Pascals and record CFM50, the single number that tells us how much conditioned air is escaping through your envelope. In Burbank’s 1960s stock, we typically see 3,500-6,000 CFM50 pre-sealing.
3. 3
   Thermal imaging and targeted inspection. Our FLIR camera finds the gaps the blower door confirmed: top plates, can lights, duct boots, the exact spots where your Icynene product is underperforming or was never applied.
4. 4
   Duct leakage test (if indicated). We pressurize the duct system and measure leakage to outside. In Burbank, leaky ducts in a vented attic can add 15-25% to cooling load.
5. 5
   Written report with photo documentation. You receive blower-door numbers, thermal images with annotations, a prioritized scope of work, and a fixed price for any remediation. No work starts without your written approval.
6. 6
   Post-work verification. If we perform air sealing or insulation work, we re-run the blower door and publish the new number. The R-value is what the label says. The performance is what the blower-door test says. We care about the second number.

Before

After

What Icynene Home Energy Audit Costs in Burbank

Most Icynene home energy audits in Burbank fall into these ranges:

• Standalone blower-door test with written report: $280-$380
• Blower-door plus full thermal imaging inspection: $380-$480
• Complete package (blower-door, thermal imaging, duct leakage test): $480-$650

Price moves up for homes over 3,500 square feet, multiple HVAC zones, or restricted attic access requiring crawl-board work. Price moves down if we’re already on-site for insulation work and can bundle the audit. Every estimate is written and fixed before we start. Bring us a competing written quote and we’ll give you a free second opinion. Call (213) 816-1699 for your exact number.

Why Burbank Homeowners Call Topside Attic Insulation Burbank for Icynene Work

We’re independently owned and operated under The Haven Standard since 2016, not a franchise or manufacturer affiliate. Wes Okafor and our crew have worked Burbank attics long enough to know that a Magnolia Park ranch with original Icynene Classic Max needs a different diagnostic approach than a 2019 build with ProSeal Eco. We don’t sell proprietary products, we don’t lock you into one brand, and we don’t blow insulation over unsealed air leaks. Our 365-Day Done Right Promise applies to every job, backed by a written scope and warranty delivered before anyone lifts a tool. We also service Reflectix and other major brands, so if your audit reveals that Icynene isn’t the right product for your situation, we’ll tell you straight and specify what is.

FAQs