Owens Corning Blown-In Insulation Nationwide

Owens Corning Blown-In Insulation in Burbank: What to Know First

We provide independent Owens Corning blown-in insulation service in Burbank, typically completing attic jobs in one day with a written price delivered before any work starts. Most Owens Corning blown-in fiberglass or cellulose top-ups in a Burbank single-family home run between $1,800 and $3,400, depending on existing depth and square footage. This page is for homeowners who already have Owens Corning insulation in their attic or walls and need it topped off, replaced, or supplemented after settling, moisture damage, or rodent activity. Call (213) 816-1699 to schedule a free estimate with a written scope, or bring us a competing quote for our free second opinion.

Call (213) 816-1699

How Owens Corning Products Fail - and How We Fix Them

• Owens Corning AttiCat Expanding Blown-In PINK Fiberglass settles unevenly in Burbank’s dry climate. The loose-fill fiberglass loses loft over 7-12 years, creating thin spots near eaves where Burbank’s Santa Ana winds pressurize the attic. We remove the settled material, air-seal top plates and can-light penetrations first, then blow new AttiCat to a verified depth with a written depth-and-coverage report.
• Owens Corning ProCat loose-fill cellulose absorbs roof-deck condensation in Burbank’s winter temperature swings. When attic ventilation is marginal, ProCat can clump and compress near the ridge, dropping its labeled R-value. We spot-remove the compromised cellulose, install baffles to maintain soffit-to-ridge airflow, and replace with fresh ProCat or switch to fiberglass if moisture recurrence is likely.
• Owens Corning R-38 batts, used as a base layer beneath blown-in, sag in older Burbank ranch homes. In Magnolia Park and similar 1950s-1960s neighborhoods, the original Kraft-faced batts detach from ceiling drywall and create thermal bypasses. We re-secure or remove the failed batts, seal the ceiling plane, then blow Owens Corning fiberglass over a stable substrate.
• Owens Corning EcoTouch batts degrade when stored in unconditioned Burbank garages before installation. The formaldehyde-free binder breaks down with heat cycling, which we see in DIY jobs where homeowners bought material months early. We source fresh Owens Corning product directly, verify the manufacturing date, and document lot numbers on the invoice.
• Owens Corning blown-in wall systems lose density in balloon-framed Burbank bungalows. The dense-pack application in open wall cavities can settle if the netting or drill-patch fails, particularly in homes near the Verdugo Mountains that experience more thermal cycling. We verify density with a wall-cavity probe test and re-dense-pack any section below 3.5 pounds per cubic foot.

Our Owens Corning Blown-In Insulation Process

1. 1
   Call and scheduling. A live person answers, or you text us. We confirm your Owens Corning product type if known, and schedule a technician visit with a text when we’re en route.
2. 2
   Attic inspection and blower-door test. We measure current insulation depth, identify thermal bypasses, and run a blower-door test - a pressurization reading that shows, in one number, how much conditioned air your building envelope is losing. In Burbank, we typically see 3,500-5,500 CFM50 on pre-1980 homes.
3. 3
   Written price before any work starts. Under Haven Standard Clause 1, you get a flat price, written scope, and written warranty before anyone lifts a tool. No exceptions.
4. 4
   Air sealing first, then insulation. We seal all top plates, wire and pipe penetrations, can lights, and chimney chases with fire-rated foam and caulk. The R-value is what the label says. The performance is what the blower-door test says. We care about the second number.
5. 5
   Blown-in installation and verification. We blow Owens Corning AttiCat, ProCat, or equivalent to the specified depth, using depth markers every 300 square feet. We also source from Johns Manville, Knauf, Rockwool, CertainTeed, and GreenFiber if your job benefits from a different material.
6. 6
   Post-test, photo record, and documentation. We re-run the blower-door test, deliver before-and-after readings, and leave you with a Documented Photo Record and written depth-and-coverage report. The 365-Day Done Right Promise applies from this moment.

Before

After

What Owens Corning Blown-In Insulation Costs in Burbank

These are real numbers for Burbank’s market, based on jobs we’ve completed in the Media District, Magnolia Park, and the hillside neighborhoods near Wildwood Canyon. Every estimate is free, every price is written, and we offer a free second opinion on any written estimate you’ve already received. Call (213) 816-1699 for your exact quote.

Why Burbank Homeowners Call Topside Attic Insulation Burbank for Owens Corning Work

We’ve been working Burbank attics since 2016, including the older ranch-style homes in Magnolia Park where the thermal bypasses hide in predictable places. Wes Okafor and our crew know the difference between an Owens Corning AttiCat job that needs a simple top-up and one where the original installation missed critical air-sealing, which means the new insulation will perform exactly as labeled. We publish before-and-after blower-door numbers on every applicable job, back everything with our 365-Day Done Right Promise, and source from Owens Corning plus Reflectix and other major brands so you’re never locked into a single product line. Calls are answered by a live person 24/7. Background-checked, uniformed technicians. Written price before any work starts, always.

FAQs